Front door handle, inner section

/ 9-3 (9440) / 2010 / 8. Body / Doors and locks / Adjustment/replacement / Front door handle, inner section

To remove

1.	The window must be closed.

2.	Remove the Front door trim .

3.	Fold down the water barrier.

4.	Remove Front door handle .

5.	Remove Front door, lock unit .

6.	Remove the door handle's inner part.

•

Slacken the bolt (A) for the inner part.

•

Slacken the nuts (B) of the window lift rail (C) and loosen the lower anchorage point.

•

Remove the door handle's inner part.

To fit

1.	Fit the door handle's inner part.

•

Position the door handle's inner part.

•

Screw in the bolt (A) for the inner part.

•

Fit the window lift rail (C) with nuts (B).

2.	Fit Front door, lock unit .

3.	Fit Front door handle .

4.	Fold the water barrier back in place.

5.	Fit the Front door trim .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.