SAAB WIS ONLINE

Seal (stuffing box), driver in differential clutch

Seal (stuffing box), driver in differential clutch

To remove


1. Remove the Propeller shaft .

2. Remove the driver (A), use a puller.


3. Remove the seal (A), use a screwdriver.



To fit


1. Fit the seal (A), use DT-49065 Fitting drift .


2. Fit the driver (A). Use DT-49048 Support .

Tightening torque 100 ± 5 Nm (73.8± 3.7 lbf ft)


3. Check the fluid level in accordance with Checking/changing fluid in the differential clutch .

4. Fit the Propeller shaft .