SAAB WIS ONLINE

Slave cylinder, B207

Slave cylinder, B207

To remove


1. Remove the gearbox, see Automatic transmission assembly B207 and Automatic transmission assembly, B207 4WD


2. Detach the delivery pipe.

3. Remove the three retaining bolts for the slave cylinder and pull it out.


To fit



1. Apply 74 96 268 Thread locking adhesive to the retaining bolts, see Summary of lubricants and sealants .

2. Bolt on the slave cylinder.

Tightening torque 10 Nm (7 lbf ft)

3. Fit the delivery pipe to the slave cylinder.

Tightening torque 22 Nm (16 lbf ft)

4. Bleed the slave cylinder before fitting the gearbox, see Bleeding the slave cylinder .

5. Fit the gearbox, see Automatic transmission assembly B207 , and Automatic transmission assembly, B207 4WD .

6. Bleed the clutch. See Bleeding the clutch hydraulic system in the car .