SAAB WIS ONLINE

Front section of the wheel housing

Front section of the wheel housing

To remove


1. Position the car in the alignment jig.

2. Remove the wheel house frame member and the headlight frame .

3. Drill out the spot welds.


4. Tap out the part and lift it away.


To fit


1. Grind all surfaces that are to be welded.

2. Apply welding primer to the surfaces that are to be welded.

3. Fit the part in place and secure with some clamps.

4. Weld the parts in place.


5. Fit the headlight frame and the wheel house frame member .

6. Grind the welds.

7. Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.

8. Apply primer to all bare metal surfaces.

9. Seal joints and seams with sealant.

10. Apply underseal after painting. Use Terostat 9320.

11. Apply rust protector after painting. Use Terotex HV 400.