Crankshaft Rear Oil Seal and Housing Replacement

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Crankshaft Rear Oil Seal and Housing Replacement

Removal Procedure

1.	Remove the engine flywheel. Refer to Engine Flywheel Replacement .

2.	Remove the oil pan. Refer to Oil Pan Replacement .

3.	Remove the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Removal .

Installation Procedure

1.	Install the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Installation .

2.	Install the oil pan. Refer to Oil Pan Replacement .

3.	Install the engine flywheel. Refer to Engine Flywheel Replacement .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.