SAAB WIS ONLINE

Engine Mount Replacement - Right Side

Engine Mount Replacement - Right Side



Callout Component Name

Preliminary Procedures

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (LAU) Air Cleaner Assembly Replacement (LF1) .

2. Install the engine support fixture. Refer to Engine Support Fixture (Engine Bridge, Retainer Frame) Engine Support Fixture (Centering Adapter) .

3. If equipped with LAU, reposition the power steering reservoir outlet hose. Refer to Power Steering Fluid Reservoir Outlet Hose Replacement (LAU) Power Steering Fluid Reservoir Outlet Hose Replacement (LF1) .

4. If equipped with LAU, remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement (LAU) Radiator Inlet Hose Replacement (LF1) .

5. Support the engine using the CH-49290 centering adapter


Special Tools

CH-49290 Centering adapter, engine subframe. For equivalent regional tools, refer to Special Tools
1 Engine Mount Fastener Refer to Fastener Caution .
Note

Perform the "Powertrain Mount Balancing-lower". Refer to the appropriate engine section.


Tighten

62 Nm (46 lb ft)
2 Engine Mount Fastener (Qty: 3)

Tighten

62 Nm (46 lb ft)
3 Engine Mount Fastener (Qty: 2)

Tighten

100 Nm (73 lb ft)
4 Engine Mount

Procedure

Transfer components as necessary.