Power Steering Fluid Reservoir Outlet Hose Replacement (LF1)

/ 9-4x / 2011 / 6. Steering assembly / Power steering system / Adjustment/replacement / Power Steering Fluid Reservoir Outlet Hose Replacement (LF1)

Removal Procedure

1.	Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .

2.	Place drain pans under the vehicle.

3.	Remove as much power steering fluid from the power steering fluid reservoir (3) as possible.

4.	Compress the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the power steering fluid reservoir.

5.	Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

6.	Compress the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the power steering pump (3).

7.	Remove the power steering fluid reservoir outlet hose from the vehicle.

Installation Procedure

1.	Position the power steering fluid reservoir outlet hose in the vehicle.

2.	Compress the power steering fluid reservoir outlet hose clamp (1) and connect the power steering fluid reservoir outlet hose (2) to the power steering pump (3).

3.	Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

4.	Compress the power steering fluid reservoir outlet hose clamp (1) and connect the power steering fluid reservoir outlet hose (2) to the power steering fluid reservoir (3).

5.	Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

6.	Clean any excess power steering fluid from the vehicle.

7.	Remove the drain pans

8.	Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.