Evaporative Emission Front Pipe Replacement

/ 9-4x / 2011 / 2. Engine / Engine management and fuel system, V6 / Adjustment/replacement / Evaporative Emission Front Pipe Replacement

Removal Procedure

1.	Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .

2.	Disengage the evaporative emission line (1) from the plastic retainer (2).

3.	Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .

4.	Disengage the evaporative emission line (1) from the plastic retainers (2) and remove the evaporative emission line.

Installation Procedure

1.	Install the evaporative emission line (1) into the plastic retainers (2).

2.	Connect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .

3.	Engage the evaporative emission line (1) to the plastic retainer (2).

4.	Connect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.