Headlamp Washer Pump Replacement
|
Headlamp Washer Pump Replacement
|
Callout
|
Component Name
|
Preliminary Procedures
Remove the windshield washer solvent container. Refer to
Windshield Washer Solvent Container Replacement
.
|
1
|
Headlamp Washer Pump
Procedure
1.
|
Drain the windshield washer solvent into a suitable clean container.
|
2.
|
Disconnect the electrical connector to the headlamp washer pump.
|
3.
|
Disconnect the headlamp washer pump hose at the headlamp washer pump.
|
4.
|
Using two suitable flat-bladed tools under the base of the headlamp washer pump, pry upward in order to release the headlamp washer pump from the headlamp washer pump grommet and container.
|
5.
|
Discard the headlamp washer pump grommet.
Note
|
Use full strength washer solvent on the new grommet in order to aid in the installation of the new headlamp washer pump.
|
|
|