SAAB WIS ONLINE

Differential Clutch Oil Filter Replacement

Differential Clutch Oil Filter Replacement



Callout Component Name

Preliminary Procedures

1. Remove the propeller shaft. Refer to Propeller Shaft Replacement .

2. Lower the differential clutch assembly, just enough to reach the cover. Do not damage the drive shaft universal joints. Refer to Rear Differential Clutch Control Module Replacement .


1 Differential Clutch Cover Bolts (Qty: 10)
Warning

The hydraulic pressure in the differential clutch is very high. To prevent personal injury, wait for at least 10 minutes before removing any parts from the differential clutch.


Refer to Fastener Caution .

Tighten

6 Nm (53 lb in)
2 Differential Clutch Cover
3 Differential Clutch Gasket

Procedure

Install a new gasket.
4 Differential Clutch Oil Plug Tighten

Tighten

14 Nm (10 lb ft)
5 Differential Clutch Oil Plug Sealing

Procedure

Use a new sealing.
6 Differential Clutch Oil Filter

Procedure

Fill new fluid in the differential clutch. Refer to Differential Clutch Oil Replacement .