Limited Slip Differential Clutch Valve Replacement
|
Limited Slip Differential Clutch Valve Replacement
|
Callout
|
Component Name
|
Warning
|
It is very important to observe maximum cleanliness when working on the differential clutch. Dirt particles can seriously damage the function and service life of the differential clutch.
|
|
|
|
|
Preliminary Procedures
Remove the propeller shaft. Refer to
Propeller Shaft Replacement
.
|
1
|
Differential Clutch Valve Electrical Connector
Procedure
Lower the rear axle assembly to gain access to the differential clutch valve. Refer to
Differential Carrier Assembly Replacement
.
|
2
|
Differential Clutch Valve Fastener (Qty: 2)
Warning
|
The hydraulic pressure in the differential clutch is very high. To prevent personal injury, wait for at least 10 minutes before removing any parts from the differential clutch.
|
|
|
|
|
Refer to
Fastener Caution
.
Tighten
3 Nm (27 lb in)
|
3
|
Limited Slip Differential Clutch Valve and Gasket
Procedure
Check the fluid level of the rear differential clutch. Refer to
Differential Clutch Oil Inspection
.
Note
|
Assemble components on a workbench and use a new gasket. DO NOT re-use an old gasket.
|
|