Rear Brake Backing Plate Replacement
Rear Brake Backing Plate Replacement |
Removal Procedure |
Refer to Brake Dust Warning .
1. |
Disable the parking brake cable adjuster. Refer to
Parking Brake Cable Adjuster Disabling
.
|
2. |
Turn the ignition to the OFF position.
|
3. |
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
|
4. |
Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
|
5. |
Remove the park brake shoes. Refer to
Parking Brake Shoe Replacement
.
|
6. |
Remove the parking brake actuator (1). Refer to
Parking Brake Actuator Replacement
.
|
7. |
Remove the rear wheel bearing and hub assembly. Refer to
Rear Wheel Bearing and Hub Replacement
.
|
8. |
Remove the rear disc brake backing plate (1).
|
Installation Procedure |
1. |
Install the rear disc brake backing plate (1).
|
2. |
Install the rear wheel bearing and hub assembly. Refer to
Rear Wheel Bearing and Hub Replacement
.
|
3. |
Install the parking brake actuator (1). Refer to
Parking Brake Actuator Replacement
.
|
4. |
Install the park brake shoes. Refer to
Parking Brake Shoe Replacement
.
|
5. |
Install the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
|
6. |
Enable the parking brake cable adjuster. Refer to
Parking Brake Cable Adjuster Enabling
.
|