SAAB WIS ONLINE

Rear Wheel Bearing and Hub Replacement

Rear Wheel Bearing and Hub Replacement



Callout Component Name

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

3. Separate the wheel drive shaft from the knuckle, if needed. Refer to Rear Wheel Drive Shaft Replacement .

4. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement .

5. Remove the Rear Wheel Speed Sensor. Refer to Rear Wheel Speed Sensor Replacement .


1 Wheel Bearing and Hub Bolt (Qty: 3) Refer to Fastener Caution .

Tighten

125 Nm (92 lb ft)
2 Wheel Bearing and Hub Assembly