SAAB WIS ONLINE

Steering Linkage Inner Tie Rod Replacement

Steering Linkage Inner Tie Rod Replacement



Callout Component Name

Preliminary Procedures

Remove the steering gear boot. Refer to Steering Gear Boot Replacement .
1 Steering Linkage Inner Tie Rod Refer to Fastener Caution .

Procedure

1. Place a wrench on the flats of the steering linkage inner tie rod housing.

2. Rotate the steering linkage inner tie rod housing counterclockwise in order to remove the steering linkage inner tie rod from the rack.

3. Rotate the steering linkage inner tie rod housing clockwise in order to install the steering linkage inner tie rod to the rack.


Tighten

70 Nm (52 lb ft)