SAAB WIS ONLINE

Turn Signal Switch Bracket Replacement

Turn Signal Switch Bracket Replacement



Callout Component Name

Preliminary Procedures

1. Remove the steering wheel. Refer to Steering Wheel Replacement .

2. Remove the steering column shroud. Refer to Steering Column Shroud Replacement .


1 Turn Signal Switch Bracket

Procedure

1. Disconnect any electrical connectors as necessary.

2. Release the 2 tabs in order to release the turn signal switch bracket from the steering column.

3. Transfer any parts as necessary. Refer to the following procedures:

Turn Signal Multifunction Switch Replacement

Windshield Wiper and Washer Switch Replacement

Steering Wheel Inflatable Restraint Module Coil Replacement

Steering angle sensor replacement

Brake and Accelerator Pedal Adjuster Switch Replacement