SAAB WIS ONLINE

Front Seat Belt Anchor Plate Tensioner Replacement

Front Seat Belt Anchor Plate Tensioner Replacement



Callout Component Name
Refer to SIR Warning .
Warning

In order to prevent accidental deployment and the risk of personal injury, do not dispose of an undeployed inflatable restraint seat belt pretensioner as normal shop waste. Undeployed seat belt pretensioners contain substances that could cause severe illness or personal injury if their sealed containers are damaged during disposal. Use the following deployment procedures to safely dispose of an undeployed seat belt pretensioner. Failure to observe the following disposal methods may be a violation of federal, state, or local laws.



Preliminary Procedures

1. Move the front seat to the full forward and full up position.

2. Disable the SIR. Refer to SIR Disabling and Enabling .

3. Remove the seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement .

4. Remove the seat outer adjuster auxiliary finish cover. Refer to Front Seat Outer Adjuster Auxiliary Finish Cover Replacement .

5. For pretensioner handling and scrapping, refer to Pretensioner Handling and Scrapping .


1 Driver or Passenger Seat Belt Tensioner Fastener Refer to Fastener Caution .

Tighten

6 Nm(53 lb in)
2 Driver of Passenger Seat Belt Tensioner Assembly Fastener

Tighten

45 Nm (33 lb ft)
3 Driver Seat Belt Tensioner Assembly

Procedure

Disconnect the electrical connector.