SAAB WIS ONLINE

Front Bumper Upper Impact Bar Replacement

Front Bumper Upper Impact Bar Replacement



Callout Component Name

Preliminary Procedures

1. Remove the bumper fascia. Refer to Front Bumper Fascia Replacement .

2. Unclip the wire harness from the deformation beam. Remove the ambient temperature sensor.

3. Remove the bolt and reposition the power steering cooler.

4. Unclip the air baffles from the impact bar.


1 Hood Primary Latch Bracket Bolt (Qty: 2) Refer to Fastener Caution .

Tighten

10 Nm (89 lb in)
2 Front Bumper Impact Bar Bracket Bolt (Qty: 8)

Tighten

30 Nm (22 lb ft)
3 Front Bumper Impact Bar