Brief description
Brief description |
The operational functions of the system are actuated via a control switch on the right-hand side of the steering wheel and with the help of DICE, see (Dashboard electronics) .
The washer and wiper system comprises: |
Windscreen wipers
The windscreen wiper assembly is located under the cover beneath the windscreen. It consists of a motor, an arm linkage and two wiper arms with wiper blades. The operational functions are controlled by DICE with the help of an intermittent wiper relay.The windscreen wipers have two speeds (high/low) and one intermittent wiper position, the frequency of which can be regulated to intervals of between 2 and 15 seconds by a control on the control switch.
Headlamp wipers
A headlamp wiper is located under each headlamp. The wipers are activated whenever the windscreen washers are switched on.Washer assembly
The washer assembly is located at the front of the left-hand front wing. It consists of a reservoir with a pump and level monitor. There are hoses leading to the nozzles on the bonnet and headlamp wiper arms. .The function is controlled by DICE. If the fluid level is low, a message is sent to the bus. SID generates an audible signal and displays WASHER FLUID LEVEL LOW.