SAAB WIS ONLINE

Fan motor, seat

Fan motor, seat

To remove



1. Raise the front seat and remove it from the car, see .

2. Remove the PSM control module from the bracket, 2 screws.

3. Remove the bracket for the PSM control module by cutting the cable tie.

Unplug the 29-pin connector from the bracket.

4. Unplug the connector and cut the cable ties.

5. Remove the 2 nuts holding the fan motor.


6. Unplug the connector to the fan motor and cut the cable ties.

Lift out the motor.


To fit



1. Refit the fan motor, 2 nuts.

2. Plug in the connector for the fan motor and fasten the wires with cable ties.

3. Replace the 29-pin connector on the bracket and reattach the bracket with cable ties.


4. Plug in the connector and secure the wires with cable ties.

5. Screw the PSM control module to the bracket, 2 screws.

6. Refit the front seat, see .