P1252
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lights up straight away.
Throttle control in limp-home mode.
Incorrect idle speed.
Cruise control inoperative.
The engine does not start when the DTC is generated.
Throttle Motor. Full PWM in Open Direction and no Motor Current.
Fault symptoms
|
•
|
CHECK ENGINE lights up straight away.
|
|
•
|
Throttle control in limp-home mode.
|
|
•
|
Cruise control inoperative.
|
|
•
|
The engine does not start when the DTC is generated.
|
Conditions
The following conditions apply for this DTC:
|
•
|
Crankshaft rotating and main relay voltage exceeds 10 V.
|
|
•
|
Throttle motor is receiving 100 % PWM in opening direction but no current.
|
Diagnostic help
An electrical fault in the throttle motor circuit is preventing the throttle from opening. The main relay voltage supplied to the control module is OK.
Diagnostic tool functions related to this fault are:
|
•
|
Activation of output for throttle motor.
|
See also the description of activations under
Menu "Activation"
for more information.
Check the wiring
|
Note
|
|
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.
|
