SAAB WIS ONLINE

P0123

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Not possible to control engine speed. Idling set to 1400 rpm.

P0123


P0123 Pedal Position Sensor Circuit 1. Short to B+.


Fault symptoms


• CHECK ENGINE lamp on.

• Not possible to control engine speed.

• Idling set to 1400 rpm.


Conditions

The following conditions apply for this DTC:


• Signal on control module sensor input is more than 4.7 V for more than 0.3 seconds. Difficult faults in PSG16 despite trouble code

Fault criteria not fulfilled for P0698 or P0699.


Diagnostic help

The pedal position sensor can be read using the diagnostic tool.

Note

A fault in the control module female connector can cause a trouble code. Check the contact for a bent pin, oxidation and tightness of pins. See