P0704
Read the instructions below then start the fault diagnostic procedure.
Symptom: Cruise control inoperative.
P0704 |
Fault symptoms
• |
Cruise control inoperative.
|
Conditions
The following conditions apply for this DTC:• |
When the status of the clutch switch does not changed for 25 gearchanges in succession.
|
Diagnosis is active above 35 km/h and 1500 rpm.
Diagnostic help
There may be a fault in the clutch switch circuit used by cruise control. Check also that the switches are free from mechanical faults with respect to fitting, etc.Note | ||
A fault in the control module female connector can cause a trouble code. Check the contact for a bent pin, oxidation and tightness of pins. See Difficult faults in PSG16 despite trouble code |