SAAB WIS ONLINE

P1122

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE on. Not possible to control engine speed. Idling set to 1400 rpm.

P1122


Pedal Position Sensors not Connected.


Fault symptoms


CHECK ENGINE on.

Not possible to control engine speed.

Idling set to 1400 rpm.


Conditions

The following conditions apply for this DTC:


Both pedal position sensor signals are low for more than 0.3 seconds.

Fault criteria not fulfilled for P0652, P0653, P0698 or P0699.


Diagnostic help

The pedal position sensor can be read using the diagnostic tool.

The pedal position sensor is probably not connected.

Note

A fault in the control module female connector can cause a trouble code. Check the contact for a bent pin, oxidation and tightness of pins. See Difficult faults in PSG16 despite trouble code