SAAB WIS ONLINE

P1696

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Engine fails to start.

P1696


Interrupted Afterrun


Fault symptoms


• CHECK ENGINE lamp on.

• Engine fails to start.


Conditions

The following conditions apply for this DTC:

Diagnosis runs when Ignition On.

Fault Interrupted Afterruncriteria:

Afterrunning function has been interrupted

Diagnostic help

In rare cases, the DTC can be generated if a new driving cycle is begun before the afterrunning function has run out.

Note

A fault in the control module female connector can cause a trouble code. Check the contact for a bent pin, oxidation and tightness of pins. See Difficult faults in PSG16 despite trouble code