SAAB WIS ONLINE

EVAP shut-off valve hose

EVAP shut-off valve hose

To remove


1. Remove the vent device, see .


2. Remove the shut-off valve and its hose clip from the hose.


3. Hold onto the cables to prevent them coming away with the hose and pull out the hose.

4. Remove the quick-release coupling and the hose clip.


To fit



1. Apply a thin layer of acid-free Vaseline to the end of the hose.

2. Insert the hose through the vent pipe until approx. 10 cm is remaining. Make sure the cables do no follow with it.

3. Fit the shut-off valve with cables and continue inserting the valve and the rest of the hose.

Note

Make sure the cables end up in the washer opening.


4. Spray with Kontakt 61 and plug in the connector.

5. Fit the top cover.


6. Fit the quick-release coupling and hose clip.

Note

The bevelled end of the quick-release coupling must be in the hose.


Note

Make sure the quick-release coupling is not damaged and that the indicator has been removed (round plastic ring in the quick-release coupling).


7. Fit the vent device, see .