SAAB WIS ONLINE

Changing the starter motor, V6 diesel

Changing the starter motor, V6 diesel

To remove


1. Remove Rear engine mounting .

2. Disconnect the cable terminals from the generator.


3. Disconnect the starter motor cable terminals.

Note

The bolts are of different lengths.


4. Remove the starter motor.

5. Insert a lever between the subframe and the engine and carefully prise them apart while lifting out the starter motor.


To fit


1. Insert a lever between the subframe and the engine and carefully prise them apart while positioning the starter motor and inserting the bolts.

2. Refit the starter motor.


Tightening torque: 50 Nm (37 lbf ft).

3. Connect the starter motor cable terminals.

4. Connect the cables to the generator.

5. Fit Rear engine mounting .