SAAB WIS ONLINE

Brake pedal, RHD

Brake pedal, RHD

To remove


1. Move the seat all the way back.

2. Remove the brake servo unit, see Brake servo, V6 diesel, RHD or Brake servo, RHD .

3. Remove the retaining nuts from the brake servo bracket/pedal assembly.


4. Remove the dashboard, see Dashboard .

5. Loosen the steering shaft UJ from the steering gear without separating the splines.

6. Unplug the pedal switch connections.

7. Undo the steering column assembly mounting to the body and pedal bracket, and move it as far back as possible.

8. Lift out the pedal assembly.


To fit


1. Fit the pedal assembly loosely to the steering column assembly and place the foam rubber damper in position between the pedal assemblies.

2. Fit the steering shaft UJ.

Tightening torque 25 Nm (18 lbf ft).

3. Tighten the pedal assembly nuts in the engine bay.


4. Fit the brake servo unit, see Fitting the brake servo, V6 diesel or Fitting the brake servo .

5. Fit the steering column assembly to the body.

6. Tighten the bolts for the pedal assembly/assemblies to the steering column assembly.

7. Fit the pedal switches.

8. Plug in the pedal switches and adjust them.

9. Fit the dashboard, see Fitting the dashboard .

10. Reset the clock and radio code, etc.