Roof member, rear 4D
Roof member, rear 4D |
1. |
Remove the roof. See
Roof 4D.
|
2. |
Drill out the spot-welds at the corners.
|
3. |
Knock away the roof member and straighten any deformed metalwork.
|
Fitting |
1. |
Grind all the surfaces that are to be welded.
|
2. |
Apply welding primer to the surfaces that are to be welded.
|
3. |
Position the roof member and fix it with a few welding clamps.
|
4. |
Weld on the roof member.
|
5. |
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
6. |
Fit the roof. See
Roof 4D
|