Level switch, engine oil (243)

/ 9-5 (9600) / 2008 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Level switch, engine oil (243)

To remove

1.	Remove the oil sump. See Oil sump (in situ) .

2.	Remove the baffle plate.

3.	Remove the connector retaining clip.

4.	Remove the oil level sensor.

To fit

1.	Fit the oil level sensor to the oil sump. Tightening torque: xx Nm (xx lbf ft)

2.	Fit the connector using a new O-ring lightly greased with vaseline.

3.	Fit the locking clip.

4.	Fit the baffle plate.

5.	Fit the oil sump. See Oil sump (in situ) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.