Rear bumper bracket, 4D

/ 9-5 (9600) / 2008 / 8. Body / Exterior / Adjustment/replacement / Rear bumper bracket, 4D

To remove

1.	Remove the bumper. See Rear bumper 4D

2.	Loosen the nuts from inside the luggage compartment.

3.	Remove the bracket.

To fit

1.	Wedge the bracket in behind the rear light cluster.

2.	Fit the bolts from inside the luggage compartment.

3.	Fit the bumper. See Rear bumper 4D

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.