Auxiliary heater, Z19, Aut, LHD
Auxiliary heater, Z19, Aut, LHD |
To remove |
1. |
Loosen the coolant expansion tank cap to release any pressure. Then tighten the cap.
|
2. |
Remove the cable tie. Remove the hose clips from the coolant hoses.
|
3. |
Clamp the hoses using
30 07 739 Hose pinch-off pliers
and detach the hoses from the heater.
|
4. |
Detach the fuel hose from the heater.
|
5. |
Remove the connector clips. Unplug the connector.
|
6. |
Undo the exhaust pipe clamp.
|
7. |
Remvoe the exhaust pipe mounting from the bulkhead.
|
8. |
Remove the exhaust pipe from the heater.
|
9. |
Remove the mounting and remove the heater from the bracket.
|
To fit |
1. |
Fit the heater to the bracket. Fit the mounting.
|
2. |
Fit the exhaust pipe to the heater.
|
3. |
Fit the exhaust pipe mounting to the bulkhead.
|
4. |
Tighten the exhaust pipe clamp.
|
5. |
Plug in the connector. Fit the connector clips.
|
6. |
Attach the fuel hose to the heater.
|
7. |
Attach the hoses to the heater. Remove
30 07 739 Hose pinch-off pliers
.
|
8. |
Fit the hose clips to the coolant hoses.
|
9. |
Fit the cable tie.
|
10. |
Pressure test the cooling system. See
Cooling system, pressure testing
.
|
11. |
Check the heater functions.
|
12. |
Fill with coolant to the correct level.
|