Coolant in Combustion Chamber
 
  
 
 
  
   
    
     |  | Coolant in Combustion Chamber | 
   
  
  
   
   
    
    
    
    
    
   
   
    
    
     
      
      
     
     
      
       | Cause | Correction | 
      
       | DEFINITION: Excessive white smoke and/or coolant type odor coming from the exhaust pipe may indicate coolant in the combustion chamber. Low coolant levels, an inoperative cooling fan, or a faulty thermostat may lead to an overtemperature condition which may cause engine component damage. 
 
 
 
          
           
            | 2. | Remove the glow plugs and inspect for glow plugs saturated by coolant or coolant in the cylinder bore. 
 
 |  
          
           
            | 3. | Inspect by performing a cylinder leak-down test. During this test, excessive air bubbles within the coolant may indicate a faulty gasket or damaged component. 
 
 |  
          
           
            | 4. | Inspect by performing a cylinder compression test. Two cylinders side-by-side on the engine block, with low compression, may indicate a failed cylinder head gasket. Refer to
             
              Engine Compression Test
             
             . 
 
 |  
 | 
      
       | Faulty cylinder head gasket 
 
 | Replace the head gasket and components, as required. Refer to
         
          Cylinder Head Cleaning and Inspection
         
         and
         
          Cylinder Head Replacement
         
         . 
 
 | 
      
       | Warped cylinder head 
 
 | Replace the cylinder head and gasket. Refer to
         
          Cylinder Head Cleaning and Inspection
         
         . 
 
 | 
      
       | Cracked cylinder head 
 
 | Replace the cylinder head and gasket. 
 
 | 
      
       | Cracked cylinder liner 
 
 | Replace the components, as required. 
 
 | 
      
       | Cylinder head or block porosity 
 
 | Replace the components, as required. 
 
 | 
      
       | EGR System Inspection 
 
 | 
 
          
           
            | 1. | Inspect EGR cooler using
             
              EN 48974
             
             EGR cooler pressure tester adapter set. 
 
 |  
          
           
            | 2. | Replace the EGR cooler if any problem is found. 
 
 |  
 |