SAAB WIS ONLINE

Oil Pump Suction Pipe and Screen Assembly Replacement

Oil Pump Suction Pipe and Screen Assembly Replacement

Removal Procedure


1. Remove the oil pan. Refer to Oil Pan Replacement .

2. Remove the five crankshaft oil deflector fasteners.


3. Remove the crankshaft oil deflector.

4. Remove the five oil pan baffle fasteners.

5. Remove the oil pan baffle.

6. Remove both oil suction pipe fasteners.


7. Remove the oil suction pipe.

8. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.


9. Remove the engine oil level sensor harness clip.

10. Remove both engine oil level sensor fasteners.

11. Remove the engine oil level sensor.


Installation Procedure


1. Install the engine oil level sensor.

2. Install both engine oil level sensor fasteners.

3. Install the engine oil level sensor harness clip.

4. Install a NEW sealing to the oil suction pipe. DO NOT reuse the old seal.


5. Install the oil suction pipe.


6. Refer to Fastener Caution .

Install the oil pump brackets and tighten to 10 Nm (89 lb in) .

7. Install the oil pan baffle.


8. Install the five oil pan baffle fasteners.

9. Install the crankshaft oil deflector.

10. Install the five crankshaft oil deflector fasteners and tighten to 10 Nm (89 lb in) .

11. Install the oil pan. Refer to Oil Pan Replacement .