SAAB WIS ONLINE

Radiator Replacement (LAU/A28NER)

Radiator Replacement (LAU/A28NER)

Removal Procedure


1.
Warning

With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap. Serious bodily injury may result.


Turn the ignition OFF.

2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

3. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

4. Drain the cooling system. Refer to Cooling System Draining and Filling (LDK/A20NHT) and Cooling System Draining and Filling (LBS/A20DTH) Cooling System Draining and Filling (LAU/A28NER) .

5. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

6. Remove the secondary air injection pipe. Refer to Secondary Air Injection Pump Replacement .

7. Remove the radiator air side baffle and radiator air lower baffle.

8.
Note

Secure the air conditioning condenser with cable ties.


Remove the air conditioning compressor and the condenser hose and the air conditioning evaporator hose. Refer to Air Conditioning Compressor and Condenser Hose Replacement (A20NHT/LDK) Air Conditioning Compressor and Condenser Hose Replacement (LBS/A20DTH) Air Conditioning Compressor and Condenser Hose Replacement (LAU/A28NER) .

9. Remove the radiator inlet hose (1) from the radiator.


10. Remove the engine coolant fan motor wiring harness from the radiator.

11. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

12.
Note

Secure the power steering fluid cooler with cable ties.


Remove the bracket of the power steering fluid cooler. Refer to Power Steering Fluid Cooler Replacement .

13.
Note

Secure the transmission fluid cooler pipe with cable ties.


Vehicles equipped with an automatic transmission, remove the upper transmission fluid cooler pipe and the lower transmission fluid cooler pipe from the radiator.

14. Remove the relay box (1).


15. Remove the radiator wiring harness connectors.

16. Remove the charge air cooler. Refer to Charge Air Cooler Radiator Replacement (LDK/A20NHT) Charge Air Cooler Radiator Replacement (Diesel) Charge Air Cooler Radiator Replacement (LAU/A28NER) .

17. With the aid of an assistant, remove the radiator support brackets (1).


18. Remove the radiator.

19. Remove the engine coolant fan shroud from the radiator. Refer to Engine Coolant Fan Shroud Replacement (Diesel) Engine Coolant Fan Shroud Replacement (LDK/A20NHT) Engine Coolant Fan Shroud Replacement (LAU/A28NER) .


Installation Procedure

Note

Ensure that all the hoses, wires, pipes and shock modules clear the vehicle during the installation process.



1. Install the engine coolant fan shroud to the radiator. Refer to Engine Coolant Fan Shroud Replacement (Diesel) Engine Coolant Fan Shroud Replacement (LDK/A20NHT) Engine Coolant Fan Shroud Replacement (LAU/A28NER) .

2. With the aid of an assistant, install the radiator.

3. Refer to Fastener Caution .

Install the radiator fastener (1) and tighten to 25 Nm (18 lb ft) .


4. Install the radiator wiring harness connectors.

5. Install the radiator outlet hose to the radiator.

6. Install the relay box (1).


7. Install the bracket of the power steering fluid cooler. Refer to Power Steering Fluid Cooler Replacement .

8. Install the engine coolant fan motor wiring harness to the radiator.

9. Install the charge air cooler. Refer to Charge Air Cooler Radiator Replacement (LDK/A20NHT) Charge Air Cooler Radiator Replacement (Diesel) Charge Air Cooler Radiator Replacement (LAU/A28NER) .

10. Vehicles equipped with an automatic transmission, install the upper transmission fluid cooler pipe and the lower transmission fluid cooler pipe to the radiator.

11. Install the radiator ground cable and tighten to 10 Nm (89 lb in) .

12. Install the air conditioning compressor and the condenser hose and the air conditioning evaporator hose. Refer to Air Conditioning Compressor and Condenser Hose Replacement (A20NHT/LDK) Air Conditioning Compressor and Condenser Hose Replacement (LBS/A20DTH) Air Conditioning Compressor and Condenser Hose Replacement (LAU/A28NER) and Air Conditioning Evaporator Hose Assembly Replacement (LDK/A20NHT) Air Conditioning Evaporator Hose Assembly Replacement (LAU/A28NER) Air Conditioning Evaporator Hose Assembly Replacement (LBS/A20DTH) .

13. Install the radiator air side baffle and the radiator air lower baffle.

14. Install the secondary air injection pipe. Refer to Secondary Air Injection Pump Replacement .

15. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

16. Install the radiator inlet hose (1) to the radiator.


17. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .

18. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

19. Fill the cooling system. Refer to Cooling System Draining and Filling (LDK/A20NHT) and Cooling System Draining and Filling (LBS/A20DTH) Cooling System Draining and Filling (LAU/A28NER) .