SAAB WIS ONLINE

Turbocharger Coolant Return Pipe Replacement (LAU/A20NER)

Turbocharger Coolant Return Pipe Replacement (LAU/A20NER)



Callout Component Name

Preliminary Procedure

1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .

2. Drain the cooling system. Refer to Cooling System Draining and Filling (LDK/A20NHT) and Cooling System Draining and Filling (LBS/A20DTH) Cooling System Draining and Filling (LAU/A28NER) .


1

Turbocharger Coolant Return Hose Fastener (Qty: 2)

2

Turbocharger Coolant Return Hose

3

Turbocharger Coolant Return Pipe Fastener

Refer to Fastener Caution .

Tighten

9 Nm (80 lb in)

4

Turbocharger Coolant Return Pipe Fastener

Note

Use NEW gaskets.


Tighten

30 Nm (22 lb ft)

5

Turbocharger Coolant Return Pipe