Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

/ 9-5 (9650) / 2010 / 6. Steering assembly / Steering linkage / Adjustment/replacement / Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

1.	Ensure that the steering wheel is set in a straight ahead position.

2.	Loosen the tie rod jam nut (5).

3.	Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications . Refer to Fastener Caution .

4.	Install the tie rod jam nut (5) and tighten to 68 Nm (50 lb ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.