Ball Joint Inspection

/ 9-5 (9650) / 2010 / 7. Suspension, wheels / Electronic chassis control / Fault diagnosis, fault symptoms / Ball Joint Inspection

1.	Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2.	Clean and inspect the ball joint seal for cuts or tears. If the ball joint seal is damaged, replace the lower control arm. Refer to Lower Control Arm Replacement (GNA) Lower Control Arm Replacement (GNB) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.