SAAB WIS ONLINE

Driver or Passenger Seat Adjuster Finish Cover Retainer Replacement (4-Way Hybrid, 6-Way Hybrid Sport)

Driver or Passenger Seat Adjuster Finish Cover Retainer Replacement (4-Way Hybrid, 6-Way Hybrid Sport)



Callout Component Name

Preliminary Procedure

Remove driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

1

Driver and Passenger Seat Adjuster Finish Cover Retainer (Qty: 2)

Refer to Fastener Caution .


Procedures

1. Move the front seat to the highest position.

2. Clip out the cap of adjuster finish cover at finish cover.

3. Unscrew the fastener of adjuster finish cover at the finish cover.

4. Clip off the adjuster finish cover at finish cover retainer.

5. Clip out the wiring harness connector for the lumbar and high adjuster switch.

6. Unscrew the bolts and remove of front seat adjuster finish cover retainer.


Tighten

5 Nm (4 lb ft)

2

Driver and Passenger Seat Adjuster Finish Cover Retainer