Sunroof Sunshade Motor Replacement

/ 9-5 (9650) / 2010 / 8. Body / Sunroof / Adjustment/replacement / Sunroof Sunshade Motor Replacement

Removal Procedure

1.	It is only necessary to lower the headliner. Only perform the steps in the headliner replacement procedure that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (With Sunroof) Headlining Trim Panel Replacement (Without Sunroof) .

2.	Remove the power sunroof motor.

2.1.

Remove the 3 bolts (1).

2.2.

Disconnect the wiring harness plug (2).

Installation Procedure

1.	Install the power sunroof motor.

2.	Refer to Fastener Caution Connect the wiring harness plug. Tighten Tighten the 3 bolts to 7 Nm (62 lb in).

3.	Verify the operation of the sunroof.

4.	When replacing the motor/actuator. Refer to Sunroof Motor/Actuator Initialization/Teach Process (New motor) Sunroof Motor/Actuator Initialization/Teach Process (Existing Motor) .

5.	Install the headlining. Refer to Headlining Trim Panel Replacement (With Sunroof) Headlining Trim Panel Replacement (Without Sunroof)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.