Automatic Transmission Flex Plate Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 1.6 l petrol / Adjustment/replacement / Automatic Transmission Flex Plate Removal

Special Tools

EN 652 Automatic Transmission Flex Plate Holder

For equivalent regional tools, refer to Special Tools .

1.	Install the EN 652 holder (1) to hold the automatic transmission flex plate (2).

2.	Loosen the 6 automatic transmission flex plate bolts.

3.	Remove the EN 652 holder (1)

4.	Remove the 6 automatic transmission flex plate bolts (2).

5.	Remove the automatic transmission flex plate (1).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.