SAAB WIS ONLINE

Camshaft Position Actuator Adjuster Installation

Camshaft Position Actuator Adjuster Installation


Special Tools

EN-45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools .



1. Refer to Fastener Caution .

Note

Two mechanics are required.


Install the camshaft adjuster (3) and the camshaft adjuster bolts (2) and tighten the bolts in three passes:

Hold at the appropriate camshaft hexagon.


1.1. First pass tighten to 65 Nm (48 lb ft)

1.2. Second pass to 120 degrees using the EN-45059 sensor kit

1.3. Third pass to 15 degrees using the EN-45059 sensor kit

2. Install the 2 camshaft adjuster closure plugs (1) and tighten to 30 Nm (23 lb ft) .