Crankshaft Balancer Installation
|
Crankshaft Balancer Installation
|
Special Tools
•
|
EN-45059
Torque Angle Sensor Kit
|
For equivalent regional tools, refer to
Special Tools
.
1.
|
Install the
EN-652
holder (1), lock the flywheel (2) or the automatic transmission flex plate via the starter ring gear.
|
2.
|
Refer to
Fastener Caution
.
Install the crankshaft balancer (1) and NEW bolt (2) and tighten in 3 passes using the
EN-45059
sensor kit:
|
|
2.1.
|
First pass in sequence to
95 Nm (70 lb ft)
|
|
2.2.
|
Second pass to
30 degrees
|
|
2.3.
|
Third pass to
15 degrees
|