Crankshaft Balancer Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 1.6 l petrol / Adjustment/replacement / Crankshaft Balancer Removal

Special Tools

EN 652 Flywheel Holder

For equivalent regional tools, refer to Special Tools .

1.	Install the EN 652 holder (1). Lock the flywheel (2) or the automatic transmission flex plate via the starter ring gear.

2.	Remove the bolt (1) and the crankshaft balancer (2).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.