Crankshaft Front Oil Seal Installation
|
Crankshaft Front Oil Seal Installation
|
Special Tools
EN-6351
Mounting Sleeves
For equivalent regional tools, refer to
Special Tools
.
1.
|
Clean the sealing surfaces.
|
2.
|
Insert the front oil seal (1).
|
3.
|
Slide the
EN-6351
sleeves (2) protective sleeve onto the crankshaft journal.
|
4.
|
Slide the crankshaft front oil seal over the protective sleeve on the crankshaft journal.
|
5.
|
Remove the protective sleeve and, using the
EN-6351
sleeves (3), press the seal ring into the pump housing.
|
6.
|
Use the crankshaft drive gear bolt (1) and washer (2) to press in the crankshaft front oil seal.
|