Drive Belt Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 1.6 l petrol / Adjustment/replacement / Drive Belt Installation

Special Tools

EN-6349 Locking Pin

For equivalent regional tools, refer to Special Tools .

1.	Install the drive belt (1).

2.	Release tension to the tensioner counterclockwise (1).

3.	Note Allow the tensioner to slide back slowly. Remove the EN 6349 pin (2).

4.	Apply tension to the tensioner at projection (1) clockwise.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.