SAAB WIS ONLINE

Drive Belt Replacement (LLU/A16LET)

Drive Belt Replacement (LLU/A16LET)



Special Tools

EN-6349 Fixing Rod

EN-50098 Stretchy Belt Installer


For equivalent regional tools, refer to Special Tools .

Removal Procedure


1. Remove the power steering pump belt with a side cutter.


2. Raise the vehicle by its full height. Refer to Lifting and Jacking the Vehicle .

3. Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement .

4. Remove the drive belt.


Apply tension to the drive belt tensioner in the direction of the arrow at the projection (1) and lock with EN-6349 fixing rod (2).

Remove the drive belt.


Installation Procedure


1. Install the drive belt.


Apply tension to the tensioner at the projection (1) counterclockwise in the direction of the arrow.

Remove the EN-6349 fixing rod (2).

Allow the tensioner to slide back slowly.

2. Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement .

3. Lower the vehicle.

4. Install the power steering pump belt.

5.
Note

During turning the engine, take care of the proper installation of the belt to belt pulley water pump.


Mount EN-50098 stretchy belt installer (1) and power steering pump belt (2) to power steering pump belt pulley (3) and turn engine slowly clockwise.


6. Remove EN-50098 stretchy belt installer.