SAAB WIS ONLINE

Engine Flywheel Installation (1.6L LLU)

Engine Flywheel Installation (1.6L LLU)



Special Tools

• EN-652 Flywheel Holder

• EN-45059 Torque Angle Sensor Kit


For equivalent regional tools, refer to Special Tools



1. Clean the thread in the crankshaft.

2. Install the flywheel (2).


3. Install the EN-652 holder (1).

4. Refer to Fastener Caution .

Install the 6 NEW flywheel bolts (2) and tighten the bolts in 2 passes using the EN-45059 sensor kit:


• First pass in sequence to 35 Nm(25 lb ft) .

• Second pass to additional 30° .

• Third pass to additional 15° .

5. Remove the EN-652 holder.