Ignition Coil Installation
|
Ignition Coil Installation
|
Special Tools
EN 6009
Remover and Installer Ignition Module
For equivalent regional tools, refer to
Special Tools
.
1.
|
Install the ignition coil module (2) with the
EN 6009
remover/installer (1).
|
2.
|
Remove the
EN 6009
remover/installer (1).
|
3.
|
Refer to
Fastener Caution
.
Note
|
Note the arrow on the cover.
|
Install the 2 ignition coil bolts and tighten to
8 Nm (71 lb in)
.
|
4.
|
Note
|
Note the arrow on the cover.
|
Install the cover of the DIS ignition coil against the direction of the arrow.
|