Ignition Coil Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 1.6 l petrol / Adjustment/replacement / Ignition Coil Removal

Special Tools

EN 6009 Remover and Installer Ignition Module

For equivalent regional tools, refer to Special Tools .

1.	Note Note the arrow on the cover. Remove the cover of the DIS ignition coil in the direction of the arrow.

2.	Remove the 2 ignition coil bolts.

3.	Install the EN 6009 remover/installer (1).

4.	Remove the ignition coil module (2) with the EN 6009 remover/installer (1).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.