SAAB WIS ONLINE

Timing Belt Removal (1.6L LLU)

Timing Belt Removal (1.6L LLU)



Special Tools

EN-6333 Locking Pin

EN-6340 Locking Tool


For equivalent regional tools, refer to Special Tools .



1.
Note

The timing belt drive gear and oil pump housing must align.


Set the engine to top dead center (TDC).

Turn the crankshaft in the direction of engine rotation, by the crankshaft balancer bolt, to cylinder 1 TDC of combustion stroke.


2.
Note

The markings (3) on the EN-6340 locking tool (1, 2) must align.


Insert the EN-6340 locking tool (1, 2) into the camshaft sprocket wheels.


3. Install the EN-6333 locking pin (3), apply tension to the timing belt tension roller (2) in the direction of the arrow, using an Allen key (1).


4. Stop the timing belt tensioner.

5.
Note

Observe direction of rotation.


Remove the timing belt (1).